Mistral XM-L2 technical dive light

Mistral xm-l2

  • Delivering breakthrough lumen output and efficacy in the XM package, the XLamp® XM-L2 LED is the highest-performing, commercially-available, single-die LED. Built on the SC³ Technology Platform. The XM-L2 LED offers the unique combination of high efficacy and high lumen output at high drive currents.
    • Max. power 10 W
    • Max. light output 1198 lm
    • Color temperature 6500 K
  • High quality reflector
    • FWHM 4,9°
  • High quality black anodized aluminium light head that optimizes head dissipation and protecting LED electronics and optics
  • Constant current („PWM less”) LED driver
    • PWM-less  CC (constant current) approach  gives  best  lm/W  from LEDs,  generates  no  acoustical  nor  EMI noise  and  enables longer runtimes compared to PWM CC or DD drivers.
    • Calibrated internal voltage reference and temp. sensor
  • Programmeable light modes (5 mode groups)
    • 100%
    • 50% 100%
    • 25% 50% 100%
    • 33% 66% 100%
    • 10% 50% 100%
  • Off-time mode memory
  • Dual Low Voltage protection
    • 2-step low voltage protection 
      • 2 step voltage protection based on accurate calibrated internal voltage reference. When battery voltage drops below 3.0V, light will blink 5 times and LVP step 1 becomes active. Driver will reduce/limit current to 25% of max. current if current mode level is higher than 25%. Modes lower than 25% would work as usual. When battery voltage drops below 2.8V (LVP step 2), the integrated battery BMS goes into shutdown mode.
    • Battery pack integrated LVP, over charge, over current, low voltage and short circuit protection
  • 2-level depth configuration menu with back/cancel option –possibility to change many settings without leaving configuration mode
  • Adjustable current via user interface: 0.125 Amp steps between 2A and 3A
    • This can be useful not just for fine-tuning LED current, but for example to reduce current consumption of all modes if longer run-times are needed for some reason. All modes are scaled down by same percentage, so overall mode current percentages remain the same.
  • Piezo switch
    • Solid stainless steel body
    • Sealed to IP69K
    • Easy to clean metal surface 
    • Long life (million cycles) 
  • Adjustable laser cutted stainless steel goodman handle with snap bolts option
  • Nickel plated IP69K rated brass AGRO cable glands
  • High quality black anodized aluminium canister body and lid
  • 17500 mAh Li-ion battery pack with integrated BMS system
  • Dual o-ring protection
  • Gold plated banana plugs
  • Stainless steel Nielsen latch
  • Every light is tested at 20 bar (~200 meter) for 60 minutes

Not available now. It is under construction and test.

Mistral XM-L2 optical performance

Leave a Reply